The EU Carbon Border Adjustment Mechanism and EU steel import quotas are changing how steel products are assessed before entering the European market. For Asian suppliers, the practical impact may include product classification, embedded-emissions information, material traceability, melt-and-pour records, quota availability and landed costs.
This article explains the difference between the two policies, the information buyers may request and how steel product suppliers can prepare for EU purchasing and customs requirements.
The EU Carbon Border Adjustment Mechanism, or CBAM, entered its definitive regime on January 1, 2026. In parallel, the EU steel import measure applicable from July 1, 2026 uses import quotas, an out-of-quota duty and melt-and-pour information requirements to regulate specified steel products entering the EU market.
These are separate policy frameworks. Neither applies automatically to every hard chrome plated steel bar, piston rod, linear shaft, cylinder tube or machined steel component. Applicability must be assessed according to the product’s CN code, technical characteristics, processing condition, country of origin, annual import volume and current quota status.
For Asian suppliers, the impact may extend beyond carbon costs and customs duties. European customers may request more detailed information about CN classification, material sources, embedded emissions, customs origin, melt-and-pour country and purchasing documentation.
1. What Is the Difference Between CBAM and EU Steel Import Quotas?
CBAM and EU steel import quotas both affect international steel trade, but they address different issues. CBAM focuses on embedded emissions in covered imported goods, while the steel quota system controls the import volume of specified steel products.
| Comparison Item | EU CBAM | EU Steel Import Quotas |
|---|---|---|
| Main purpose | Address embedded emissions in covered imports | Control the import volume of specified steel products |
| Main responsibility | EU importer, authorised CBAM declarant or applicable indirect customs representative | EU importer and customs declarant |
| Key criteria | CN code, annual import volume and embedded emissions | CN code, country of origin and quota availability |
| Possible impact | Authorisation, emissions reporting, verification and certificate costs | A 50% out-of-quota duty when the applicable quota is exhausted |
| Supplier preparation | Production and embedded-emissions information | Origin and melt-and-pour information |
CBAM focuses on embedded emissions
CBAM applies a carbon price to emissions embedded in certain carbon-intensive goods imported into the EU. Following the transitional phase from October 2023 through December 2025, the definitive CBAM regime began on January 1, 2026.
It currently covers selected goods in sectors including iron and steel, aluminium, cement, fertilisers, electricity and hydrogen. CBAM does not automatically cover every finished product containing steel. Coverage is primarily determined by whether the product’s CN code is included in the current CBAM scope.
Under the definitive regime, EU importers or applicable indirect customs representatives importing CBAM goods above the annual 50-tonne mass threshold generally need to meet authorisation, emissions-reporting and certificate requirements. Exceptions and product-specific rules may apply.
The first annual CBAM declaration, covering eligible goods imported during 2026, is due by September 30, 2027, together with the corresponding certificate-surrender obligation.
Official information: European Commission CBAM Definitive Regime
Steel import quotas focus on import volume
The EU steel measure controls the volume of specified steel products that can enter the EU without the additional out-of-quota duty. The regulation establishes annual quotas totalling approximately 18.3 million tonnes across 30 steel product categories.
Imports exceeding the applicable quota are subject to a 50% out-of-quota duty. Entry within the quota does not necessarily exempt a product from ordinary customs duties or other import charges.
The measure generally applies to products originating outside the European Economic Area. Product scope, country of origin, quota allocation and melt-and-pour requirements must be reviewed under the current rules.
Official information: European Commission Protecting EU Steelmaking
- CBAM focuses on embedded emissions in covered imported goods.
- Steel quotas focus on the import volume of specified steel products.
- A shipment may be affected by one policy, both policies or neither.
- Commercial product names alone cannot determine regulatory coverage.
- CN code, origin, processing condition, annual volume and quota status must be reviewed.
2. How Does CBAM Affect Asian Steel Product Suppliers?
Formal CBAM obligations generally fall on EU importers, authorised CBAM declarants or applicable indirect customs representatives. However, Asian manufacturers may receive detailed requests for product, manufacturing and embedded-emissions information.
Competitiveness may therefore depend on more than price, dimensions, surface quality and delivery time. European buyers may also evaluate how clearly a supplier can provide the technical and production information agreed for an order.
The first step is to determine whether the exported product falls within a CN code covered by CBAM. A hard chrome plated steel bar, finished piston rod, linear shaft, cylinder tube or machined component should not be assumed to be covered or excluded based only on its commercial name.
Material, dimensions, physical form, processing level, technical characteristics and intended use may all be relevant when determining the appropriate CN classification. Final classification should be confirmed by the EU importer, customs broker or another qualified professional.
Emissions information for iron and steel products
Where a product is confirmed as falling within the CBAM scope, the importer may request production-installation information, reporting-period and production-volume data, principal production processes, direct emissions from the installation, and quantities and embedded emissions of relevant precursor materials.
Verification information may also be required when actual emissions values are used. During the definitive regime, most iron and steel goods listed in CBAM Annex II primarily account for direct emissions. Indirect emissions from electricity consumed during production are generally not included directly in their embedded emissions.
Where a relevant precursor not listed in Annex II is used, its applicable indirect embedded emissions may still need to be included. Corporate greenhouse-gas inventories and product carbon-footprint studies can provide a useful foundation, but their boundaries and calculation methods may differ from CBAM requirements.
- Formal CBAM obligations generally fall on the EU importing party.
- Asian suppliers may still need to provide production and emissions information.
- Iron and steel goods primarily involve direct emissions and applicable precursor emissions.
- Documentation formats, deadlines and responsibilities should be agreed before production.
3. How Do EU Steel Import Quotas Affect Steel Exports?
EU steel import quotas may have a more immediate effect on landed cost when a product falls within a regulated steel category. The current steel measure has applied since July 1, 2026 and provides annual quotas totalling approximately 18.3 million tonnes.
Imports above the relevant quota are subject to a 50% out-of-quota duty. The treatment of an individual shipment depends on several factors:
- The applicable CN code and steel product category
- The declared country of origin
- The relevant quota allocation and available balance
- The date the customs declaration is accepted
- The required origin and melt-and-pour evidence
Shipping products before the end of a quota period does not guarantee entry without the additional out-of-quota duty. Treatment generally depends on the applicable customs procedure and the quota balance available when the import declaration is accepted.
Melt-and-pour traceability
The steel measure requires information about the country where the steel was originally melted and poured. The melt-and-pour country and the customs country of origin are related but are not necessarily identical.
Importers may therefore request documentary evidence linking the source mill and melt-and-pour country to the finished shipment. Suppliers and buyers should monitor official updates rather than rely on a one-time assessment because product scope, quota allocation and documentation requirements may change.
- Quota status can directly affect the landed cost of regulated steel products.
- Country of origin and melt-and-pour country are not always the same.
- Quota availability should be reviewed close to the customs-clearance date.
- Material and mill records should remain traceable to the finished shipment.
4. What Are the Main Risks for Asian Suppliers?
Incorrect product classification
General descriptions such as “chrome bar,” “hydraulic rod” or “machined shaft” are not sufficient for determining customs treatment. An incorrect CN code may lead to unexpected duties, customs delays, additional documentation requests or disagreements between the exporter and importer.
Insufficient material traceability
If material certificates, heat numbers, source mills or production records cannot be linked to the finished shipment, the importer may have difficulty supporting origin, melt-and-pour or emissions declarations.
Inconsistent emissions data
Carbon information prepared for corporate sustainability reporting may not follow the same boundaries, methods or verification requirements used under CBAM. Existing data may support further assessment, but it should be reviewed against the applicable CBAM methodology before use.
Unexpected landed costs
A quotation may become uncompetitive if the parties have not clarified responsibility for emissions-data preparation, independent verification, CBAM certificates, out-of-quota duties, customs expenses and additional documentation.
Delayed customer approval
European buyers may need more time to review product classification, material origin, emissions information and supplier records. Preparing these documents only shortly before shipment may cause avoidable delays.
- Product classification should be reviewed before the quotation is finalised.
- Material, production and shipping records should use consistent batch references.
- CBAM-related information and ordinary carbon-footprint data should not be treated as interchangeable without review.
- Commercial responsibility for regulatory costs should be agreed in advance.
5. What Opportunities Can Well-Prepared Suppliers Capture?
Stronger relationships with European buyers
Suppliers that respond clearly to technical, material, origin and emissions-related requests can reduce uncertainty during sourcing, compliance reviews and customs preparation. This capability may support more stable, long-term relationships with European customers.
Greater value beyond unit price
For precision steel products, buyers may consider dimensional consistency, surface quality, material traceability, manufacturing capability, inspection records, protective packaging, documentation accuracy and delivery reliability in addition to unit price.
Demand for products closer to final specifications
Custom machining, heat treatment, grinding, polishing and hard chrome plating may reduce the secondary processing required after delivery. However, additional processing does not automatically remove a product from CBAM or steel quota coverage. The finished product’s CN classification must still be assessed separately.
Preparation for future supply-chain requirements
Even when a product is not currently covered, European customers may request carbon and traceability information under their internal procurement or sustainability policies. Maintaining clear production and material records can support both current reviews and future regulatory changes.
- Clear documentation can reduce uncertainty during supplier evaluation.
- Traceability and information quality can provide value beyond the quoted unit price.
- Integrated processing may help buyers reduce secondary manufacturing steps.
- Carbon and production data management can support future procurement requirements.
6. What Information Should Be Prepared Before Exporting to the EU?
The following checklist provides manufacturers, importers, engineers and purchasing teams with a practical starting point for quotation, order confirmation and customs preparation.
Product and Classification Information
- Detailed product description and drawing
- Intended application
- Material grade and applicable standard
- Dimensions and tolerances
- Physical form and processing condition
- Existing export or classification records
- CN code confirmed by the importer or qualified customs professional
Material and Origin Information
- Mill test certificate or material certificate
- Heat or batch number
- Source mill identification
- Customs country of origin
- Melt-and-pour country when required
- References linking raw-material and finished-product batches where agreed
Manufacturing Information
- Production location and principal processes
- Heat-treatment requirements
- Grinding, polishing, plating and machining specifications
- Inspection and test records
- Packaging and corrosion-protection requirements
CBAM and Commercial Information
- Production installation and reporting period
- Production quantity and principal production processes
- Direct emissions data from the installation
- Relevant precursor quantities and embedded emissions
- Verification information when actual values are used
- Responsibility for CBAM-related information and costs
- Responsibility for quota-related duties
- Delivery terms and customs-clearance arrangements
This checklist does not replace a formal customs or CBAM assessment. The exact information required should be confirmed according to the product, CN code, contract terms and importer requirements.
7. How FU-LONG Supports Product and Purchasing Information Preparation
At FU-LONG, we manufacture precision steel products according to confirmed customer drawings and technical specifications.
Our product range includes:
- Hard chrome plated steel bars, piston rods and linear shafts
- Special-material hard chrome plated steel bars
- Honed, S.R.B. and telescopic cylinder tubes
- Custom machined products manufactured according to customer drawings
Our manufacturing capabilities include turning, milling, grinding, boring, heat treatment, polishing and electroplating. Precision inspection equipment supports manufacturing and quality control according to customer drawings, purchasing specifications and application requirements.
For products intended for the EU market, customers can identify the required material grade, dimensional tolerances, heat treatment, coating specifications, surface quality, inspection methods and documentation during quotation and order confirmation.
The documents available for an order should be confirmed according to the product, material source, manufacturing process, approved drawing and contractual requirements.
Regarding environmental and carbon management, FU-LONG has implemented ISO 14001 environmental management and ISO 50001 energy management systems and has obtained an ISO 14064-1 greenhouse gas inventory opinion report.
In addition, FU-LONG’s 20 mm × 3,000 mm hard chrome plated steel bar has completed product carbon footprint verification in accordance with ISO 14067:2018. Through greenhouse gas inventories, environmental management and energy management systems, we continue to enhance carbon data quality and sustainable manufacturing management in response to the growing carbon-information requirements of international customers.
CN classification, CBAM applicability, steel quota eligibility, customs treatment and formal import declarations should be confirmed by the EU importer and qualified customs or regulatory professionals.
- Complete drawings and technical specifications help define material, dimensional, surface-treatment and inspection requirements.
- FU-LONG’s manufacturing capabilities include turning, milling, grinding, boring, heat treatment, polishing and electroplating.
- Precision inspection equipment supports dimensional and surface-quality control.
- Order documentation should be confirmed according to product specifications, material sources and contractual requirements.
- Carbon-management systems support the growing information requirements of international purchasing teams.
Explore FU-LONG Products
8. Frequently Asked Questions
Are all steel bars, piston rods and linear shafts covered by CBAM?
No. Coverage depends primarily on the product’s CN code and whether that code is included in the current CBAM scope. Material, processing condition, product form and technical characteristics may all affect classification.
Who is responsible for CBAM declarations and certificate surrender?
Legal responsibility generally falls on the EU importer, authorised CBAM declarant or an applicable indirect customs representative. A non-EU supplier may still need to provide product, production and embedded-emissions information.
Are CBAM and EU steel import quotas the same policy?
No. CBAM addresses embedded emissions and related carbon costs. The steel quota system controls the volume of specified steel products that may enter without the additional out-of-quota duty. One product may be affected by both systems.
Does ISO 14067 verification automatically satisfy CBAM requirements?
ISO 14067 product carbon footprint verification supports product-level carbon data and emissions management. When carbon information is used for CBAM reporting, it must be prepared and reviewed according to the applicable CBAM methodology and reporting requirements.
What information should Asian steel suppliers prepare before exporting to the EU?
Recommended information includes product drawings, material grades, technical classification information, material certificates, heat numbers, origin and melt-and-pour information, manufacturing location, principal processes, inspection records, applicable embedded-emissions information and agreed commercial responsibilities.
If you are sourcing hard chrome plated steel bars, piston rods, linear shafts, hydraulic or pneumatic cylinder tubes, or custom machined products for the European market, send FU-LONG your drawings, technical specifications, application conditions and inspection requirements. Our team can review the manufacturing requirements for your application.
Contact FU-LONG